FEEDER
  • Linear_Motion_Shakeout_1

    SHAKEOUT

    Shakeouts are generally placed directly after the ball ejector of a green sand molding line. The separation of casting and molding

  • SHAKEOUT

    Shakeouts are generally placed directly after the ball ejector of a green sand molding line. The separation of casting and molding

SHAKEOUT
 
  • Cast_Iron_conveyor

    SORTING/CASTING CONVEYOR

    Sorting/casting conveyors are mass-compensated low-speed resonance channels with low acceleration values and low flow velocities.

  • Casting_conveyor

    SORTING/CASTING CONVEYOR

    Sorting/casting conveyors are mass-compensated low-speed resonance channels with low acceleration values and low flow velocities.

  • SORTING/CASTING CONVEYOR

    Sorting/casting conveyors are mass-compensated low-speed resonance channels with low acceleration values and low flow velocities.

SORTING/CASTING CONVEYOR
 
  • Mould_Dump_conveyor

    MOULD DUMP CONVEYORS

    Mould Dump conveyors are mass-compensated low-speed resonance channels with low acceleration values. The trough is made of wear-resistant steel.

  • Dump_conveyor_Vibration_shake_drum_plant_in_Feeder

    MOULD DUMP CONVEYORS

    Mould dump conveyors are mass-compensated low-speed resonance channels with low acceleration values​​. The trough is made of wear-resistant steel.

MOULD DUMP CONVEYORS

SAND TRANSPORT GUTTER

Sand transport gutters are used in foundries below separation gutters to transport the used sand over longer distances in the direction of sand preparation.

SAND TRANSPORT GUTTER
 

GATE FEEDER

Gate feeders allow the pumping of sand castings or, depending on the parameters, either by gutter output left or right gutter output.

GATE FEEDER
 
  • Swivel_Hopper_Discharge_Feeder

    HOPPER DISCHARGE FEEDER

    Hopper discharge feeders with integral feed chutes for feeder from bunkers or hoppers are available in various designs. The FUFB deisgn uses unbalanced motors

  • Hopper_Discharge_Feeder

    HOPPER DISCHARGE FEEDER

    Hopper discharge feeders with integral feed chutes for feeder from bunkers or hoppers are available in various designs. The FUFB deisgn uses unbalanced motors

HOPPER DISCHARGE FEEDER

DOSING FEEDER

Dosing feeders are used for small applications or as hopper dicharge feeders. Highly accurate control of the feed rate is possible with the electro-magnetic

DOSING FEEDER
 

VIBRATION SHAKEDRUM DRUM

Vibration shakeout drums are generally located directly after the cast form a wet ball ejector system. From vibrations of suitable parameters with high acceleration,

VIBRATION SHAKE DRUM
 
  • FURNACE CHARGER

    Furnace Charger for feeding to furnaces in foundry & steel melting shops.

  • Furnace_Charger_in_Feeder_aluminium

    FURNACE CHARGER

    Furnace Charger for feeding to furnaces in foundry & steel melting shops.

FURNACE CHARGER
 
           
“UNIQUE”, 4TH FLOOR, OFF VEER SAVARKAR MARG PRABHADEVI, MUMBAI – 400 025, INDIA.